NINVA 凝华北京凝华科技有限公司

Plates & Rings · Guide Fits · Process Development

Equipment for Industrial Ceramic Components

For industrial ceramic plates, rings, guide components and thermal-management structures, select grinding, laser machining or EDM equipment for suitably conductive materials against the material, assembly relationships and machining features. Machining trials and inspection assess machine application conditions, while wear, thermal performance and service life are validated for the material and operating conditions.

Discuss Equipment Selection
Alumina and zirconia ceramicsAluminum nitride and silicon carbide ceramicsSuitable electrically conductive ceramic gradesCopper–diamond composites, subject to EDM assessment

TYPICAL APPLICATIONS

Typical Applications

Typical Applications 01

Ceramic Plates & Mating Rings

Discuss operations, support and dimensional inspection for faces, inner and outer profiles, steps and mating relationships.

Typical Applications 02

Wear Components for Guiding & Locating

Assess structural machining against guide surfaces, holes, grooves and fit requirements. Confirm wear performance and service life separately for the material and operating conditions.

Typical Applications 03

Thermal-Management Substrates & Structures

Review machining of profiles, mounting holes, mating surfaces and local features, without treating dimensional accuracy as a measure of thermal performance.

Typical Applications 04

Precision Conductive-Ceramic & Copper–Diamond Parts

After confirming suitable electrical conductivity, assess EDM requirements for cavities, profiles and precision fits.

PROCESS REQUIREMENTS

Machining Requirements

01

Edges & Surfaces in Hard, Brittle Materials

Plates, rings and thin-walled structures require attention to support, tool condition and operation sequence, with edges and surfaces assessed against defined inspection requirements.

02

Assembly Fits & Process Variation

Use consistent datums for inner and outer profiles, steps and mating surfaces, and assess how part reversal, workholding and multiple operations affect geometric relationships.

03

Machining Capability & Material Performance

Wear resistance, thermal conductivity, insulation and media compatibility depend on the material and operating conditions. They cannot be inferred from machine specifications or a single machining sample.

PROCESS & EQUIPMENT

Processes & Equipment

02

Local Shaping & Cutting of Ceramics

For local engraving, shaping and cutting of suitable ceramics, assess laser machining and subsequent operations against the geometry, material and surface requirements.

FROM APPLICATION TO EQUIPMENT

Select & Validate

Share material, drawing and acceptance requirements to assess machine suitability, conduct pre-sales machining trials and define the configuration.

An account manager responds within 24 hours. Machining trials generally take 3–20 days, with a confidentiality agreement available.

Discuss Equipment Selection
  1. 01Specify the material grade, conductivity, drawing and operating conditions, distinguishing machining requirements from material-performance requirements.
  2. 02Confirm datums, mating surfaces, workholding and tooling space, and agree on methods for dimensional, edge and surface inspection.
  3. 03Validate the process against samples and target production output. Assess wear, thermal performance and service life separately through material and application testing.

RELATED APPLICATIONS

Explore related applications