PDC compacts requiring contour machining
Discuss subsequent shaping against the material-layer construction and target contour.
北京凝华科技有限公司PDC MATERIAL PROCESSING
For PDC compacts, NINVA supports the selection of laser shaping equipment and wire EDM equipment for suitable conductive grades, based on material construction and target contours. Machining trials validate suitability, while production targets guide model selection and configuration.
Discuss Equipment SelectionTYPICAL APPLICATIONS
Discuss subsequent shaping against the material-layer construction and target contour.
Start with the target drawing, incoming condition and inspection method.
Establish material conductivity before assessing a wire-EDM route.
PROCESS REQUIREMENTS
The grade and construction of the diamond layer, substrate and interface
Starting dimensions, target contour, allowance and workholding locations
Define requirements for machined edges, surface integrity and subsequent operations. If wire EDM is being considered, confirm that the material has suitable electrical conductivity.
PROCESS & EQUIPMENT
Define the PDC grade, construction, incoming condition and target contour first.
Discuss the LCX30 Plus and LMX60D for PDC laser shaping, and the NH400PV as a wire-EDM candidate for suitable conductive grades.
Validate the route using a sample, contour file and inspection method before confirming the working dimensions, configuration and delivery scope for the selected model.
FROM APPLICATION TO EQUIPMENT
Share material, drawing and acceptance requirements to assess machine suitability, conduct pre-sales machining trials and define the configuration.
An account manager responds within 24 hours. Machining trials generally take 3–20 days, with a confidentiality agreement available.
Discuss Equipment SelectionRELATED APPLICATIONS
NINVA provides tool production and resharpening equipment for PCD tools used in edgebanding premilling, panel cutting and flooring profiles. Tool geometry, cutting-edge and workholding requirements guide the selection, configuration and application assessment of EDM equipment.
For PCD tools used to machine aluminium alloys and other non-ferrous materials, NINVA supports the selection of tool production and resharpening equipment. Stepped profiles, helical edges and workholding space define the required machine functions, process validation and configuration.
NINVA provides EDM sharpening equipment for the tooth tops and sides of PCD saw blades. Tooth geometry, angles, workholding and inspection requirements connect each operation with the appropriate model, machine configuration and pre-sales machining trials.