PCD circular saw blades
Identify the tooth surfaces to be machined and the existing blade construction.
北京凝华科技有限公司PCD CIRCULAR SAWS
NINVA provides EDM sharpening equipment for the tooth tops and sides of PCD saw blades. Tooth geometry, angles, workholding and inspection requirements connect each operation with the appropriate model, machine configuration and pre-sales machining trials.
Discuss Equipment SelectionTYPICAL APPLICATIONS
Identify the tooth surfaces to be machined and the existing blade construction.
Discuss machine selection around tooth-top geometry, angles and stock allowance.
Review the operation against both tooth sides, cutting width and workholding datums.
PROCESS REQUIREMENTS
Whether the requested operation is on the tooth top, sides or another tooth surface
Tooth geometry, sharpening angles, cutting width and starting allowance
Review the bore, blade-body construction and workholding datums. For used blades, assess wear, damage and the remaining PCD tip allowance.
PROCESS & EQUIPMENT
Identify the tooth surfaces to be machined and separate top-sharpening from double-side sharpening tasks.
After confirming that the PCD grade is suitable for EDM, discuss the MX813 for tooth-top sharpening and the MF823 for double-side sharpening.
Confirm workholding and inspection items for each operation using the actual blade, tooth drawing and inspection method. Requests for other tooth surfaces require a separate process and equipment review.
FROM APPLICATION TO EQUIPMENT
Share material, drawing and acceptance requirements to assess machine suitability, conduct pre-sales machining trials and define the configuration.
An account manager responds within 24 hours. Machining trials generally take 3–20 days, with a confidentiality agreement available.
Discuss Equipment SelectionRELATED APPLICATIONS
NINVA provides tool production and resharpening equipment for PCD tools used in edgebanding premilling, panel cutting and flooring profiles. Tool geometry, cutting-edge and workholding requirements guide the selection, configuration and application assessment of EDM equipment.
For PCD tools used to machine aluminium alloys and other non-ferrous materials, NINVA supports the selection of tool production and resharpening equipment. Stepped profiles, helical edges and workholding space define the required machine functions, process validation and configuration.
For PDC compacts, NINVA supports the selection of laser shaping equipment and wire EDM equipment for suitable conductive grades, based on material construction and target contours. Machining trials validate suitability, while production targets guide model selection and configuration.