PCD edgebanding premilling cutters
Review peripheral cutting edges, shear angles and the remaining allowance on used tools.
北京凝华科技有限公司WOODWORKING PCD TOOLS
NINVA provides tool production and resharpening equipment for PCD tools used in edgebanding premilling, panel cutting and flooring profiles. Tool geometry, cutting-edge and workholding requirements guide the selection, configuration and application assessment of EDM equipment.
Discuss Equipment SelectionTYPICAL APPLICATIONS
Review peripheral cutting edges, shear angles and the remaining allowance on used tools.
Discuss the flooring profile, disc-type construction and workholding datums.
Assess shank construction, helical edges and access around the flutes.
PROCESS REQUIREMENTS
How the profile, cutting-edge position and shear angle will be specified and inspected
Edge wear, local damage and remaining resharpening allowance
Review workholding, datums and body clearance on disc-type or shank tools, and confirm that the PCD grade is suitable for the proposed EDM process.
PROCESS & EQUIPMENT
Start with the tool drawing, material grade and whether the task is new-tool production or resharpening. Identify the edges and profiles to be machined.
After confirming that the PCD grade is suitable for EDM, discuss the QD400V for edge wire cutting of disc-type, shank-type and helical tools, and the MD43Plus for sharpening or regrinding helical and contoured tools. Assess suitable tool geometries for the MD50 Auto and MD25 separately.
Use a sample or a specific tool to confirm the process and machine configuration against workholding, allowance and inspection requirements.
FROM APPLICATION TO EQUIPMENT
Share material, drawing and acceptance requirements to assess machine suitability, conduct pre-sales machining trials and define the configuration.
An account manager responds within 24 hours. Machining trials generally take 3–20 days, with a confidentiality agreement available.
Discuss Equipment SelectionRELATED APPLICATIONS
For PCD tools used to machine aluminium alloys and other non-ferrous materials, NINVA supports the selection of tool production and resharpening equipment. Stepped profiles, helical edges and workholding space define the required machine functions, process validation and configuration.
NINVA provides EDM sharpening equipment for the tooth tops and sides of PCD saw blades. Tooth geometry, angles, workholding and inspection requirements connect each operation with the appropriate model, machine configuration and pre-sales machining trials.
For PDC compacts, NINVA supports the selection of laser shaping equipment and wire EDM equipment for suitable conductive grades, based on material construction and target contours. Machining trials validate suitability, while production targets guide model selection and configuration.