NINVA 凝华北京凝华科技有限公司

APPLICATION SOLUTIONS

Choose equipment for your part and machining task.

Across advanced ceramics and superhard materials, assess processes and machine configuration against the part, material, critical features and acceptance requirements.

SEMICONDUCTOR PART SOLUTIONS

Semiconductor part process solutions

5 part solutions

Electrostatic chucks
ELECTROSTATIC CHUCK

Electrostatic chucks

Start with the plate surfaces and microfeatures

Sintered blank & allowance → datum/plate grinding → contours & grooves → helium holes/passages → surface finishing → microfeatures → cleaning & part acceptance

Surfaces & datumsThin-plate workholdingSurface microfeatures
Explore the part solution ↗
Aluminum nitride heaters
CERAMIC HEATER

Aluminum nitride heaters

Balance stock removal with embedded-feature protection

Incoming part & protected regions → plate/datum grinding → connecting features → thermocouple holes/lead passages → local laser features → surface finishing → cleaning & geometric/functional acceptance

Stock removalPlate-to-shaft datumsHole & groove access
Explore the part solution ↗
Focus rings
FOCUS RING

Focus rings

Connect ring support, setup datums & profile requirements

Ring blank & allowance → conditional contour pre-machining → support/datum grinding → contour/step finish grinding → surface finishing → cleaning & geometric/application acceptance

Thin-ring workholdingProfiles & stepsDatums between setups
Explore the part solution ↗
Showerheads
SHOWERHEAD

Showerheads

Define hole type, depth & edge requirements first

Blank & datums → plate/contour grinding → dedicated hole-pattern machining → conditional local-feature branches → surface finishing → cleaning/patency checks → hole-pattern & application acceptance

Dense-hole consistencyHole edges & stepsPlate & hole-pattern datums
Explore the part solution ↗
SiC / QUARTZ
WAFER BOAT

Wafer boats

Define whole-part & local-feature machining scope first

Integral/separate blank → machining space & datums → local supporting features → segmented slot grinding → between-slot checks/wheel feedback → edges & assembly → cleaning & full-length acceptance

Slot pitch & accumulated errorDeep-slot accessLong-part workholding space
Explore the part solution ↗

INDUSTRY APPLICATIONS

Industries and machining objects

OPERATION VALIDATION

Machining samples within the process chain

Surface feature machining sample on a 12-inch alumina electrostatic chuck
LTC400

Electrostatic Chuck Surface Feature Machining

Material and workpiece
12-inch alumina electrostatic chuck
Bump depth
15.5 μm±1 μm
Bump diameter
0.85 mm±0.01 mm
View related equipment
Surface deep engraving sample with curved grooves in alumina
LTC400

Alumina Surface Deep Engraving

Material
Alumina
Material size
30 mm
Machined feature
Surface deep engraving of curved grooves
Depth accuracy
±1 μm
View related equipment

VALIDATE YOUR MACHINE SELECTION

Bring the drawing. Define the machine solution.

Share the part, material, critical requirements and output objectives to discuss candidate machines, trials and configuration.

An account manager responds within 24 hours. Trials generally take 3–20 days; an NDA is available.